Advanced settings

Where this fits

Open Configuration from the main screen, then the Advanced tab. These are system-wide settings. Press Apply to save, Cancel to discard and return to the main menu, or Reset to restore the standard defaults.

Tracker & display

How the barrel tracker draws on screen. Needs barrel-tracking hardware to be visible.

• Show lead indicator Draws an indicator showing your lead on the target — a coaching aid for seeing how far ahead you're pointing.
• Tracker type How the barrel trace is drawn: Dots or a continuous Line.
• Tracker color/size The trace's colour and thickness: 1-pixel or 2-pixel, in Yellow or Magenta. Pick whatever reads best against your backgrounds. This is stored on the machine itself, not per shooter.

Audio

Sound timing.

• Random sound off Occasionally suppresses the throw sound, so you can't rely on hearing the machine to time your call.
• Sound to throw delay Milliseconds The gap between the call sound and the clay actually launching.

Ballistics & weather

Physics tuning that affects how targets fly and break. These influence scoring, so treat them as install-time settings.

• Wind calm height The height below which wind has no effect — keeps low targets steady even with wind enabled.
• Clay weight offset Adjusts the simulated clay weight, which changes how it carries and how easily it breaks.
• Shot size adjustment (pellet cloud) Scales the pellet cloud from 60% to 140% (100% is standard). Larger makes hits more forgiving, smaller makes them stricter.

Skeet

Skeet-specific tuning. House offset, lights-out delay, and the speed/spread switches affect the skeet discipline only.

• Skeet house offset (shift crossing point) Shifts where the two houses' targets cross. Options run from No offset through High house −1 to −3 and +1 to +3.
• Lights out to throw delay Milliseconds — matches your trap electronics The delay between the indicator light going out and the clay launching. The right value depends on your machine's electronics.
• Dynamic speed Varies clay speed for less predictable targets.
• Extreme spread Widens the range of target angles for a harder course.
• Use initial halo Shows a halo on the target at launch.
• Random halo off Occasionally drops the halo, so you can't rely on it.

Quick start

1. Open Configuration → Advanced.
2. Set the tracker type and colour so the trace reads well on your screens.
3. Leave ballistics at defaults unless you have a reason to change them.
4. Set the skeet lights-out delay to match your trap electronics (see table).
5. Press Apply.